| IEC |
TC 55 |
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire |
IEC 60317-0-4:2020 |
60317-0-4:2020 |
4 |
2020 |
SDG 9
|
| ISO |
ISO/TC 28 |
Determination of flash point — Modified continuously closed cup (MCCCFP) method |
ISO/PWI 5125 |
5125 |
1 |
|
SDG 6
|
| IEC |
TC 62/SC 62B |
Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
IEC 60601-1-3:2008 |
60601-1-3:2008 |
2 |
2008 |
SDG 3
|
| IEC |
TC 49 |
Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines |
IEC 61837-1:2012 |
61837-1:2012 |
2 |
2012 |
SDG 9
|
| ISO |
ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
ISO 3245:2015 |
3245 |
4 |
2015 |
SDG 9
|
| ASTM |
D20.96 |
Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
D5511 |
D5511 |
|
2018 |
SDG 9, 12, 13, 15
|
| ISO |
ISO/TC 172/SC 4 |
Optics and optical instruments — Specifications for astronomical telescopes |
ISO 14134:2006 |
14134 |
1 |
2006 |
SDG 9
|
| IEC |
TC 89 |
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT) |
IEC 60695-2-11:2021 |
60695-2-11:2021 |
3 |
2021 |
SDG 3, 4, 7, 9, 11, 12
|
| ISO |
ISO/IEC JTC 1/SC 28 |
Information technology — Office equipment — Viewing environment guideline for office equipment |
ISO/IEC TR 21565:2018 |
21565 |
1 |
2018 |
SDG 9
|
| ASTM |
D34.03 |
Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples |
E0790 |
E0790 |
|
2021 |
SDG 12
|
| IEC |
TC 47/SC 47A |
Integrated circuits - Three dimensional integrated circuits - Part 2: Alignment of stacked dies having fine pitch interconnect |
IEC 63011-2:2018 |
63011-2:2018 |
1 |
2018 |
SDG 9
|
| ISO |
ISO/TC 29 |
Cutting tool data representation and exchange — Part 150: Usage guidelines |
ISO/TS 13399-150:2008 |
13399 |
1 |
2008 |
SDG 9
|
| ISO |
ISO/TC 138/SC 7 |
Industrial valves — Butterfly valves of thermoplastics materials |
ISO 16136:2006 |
16136 |
1 |
2006 |
SDG 9
|
| ISO |
ISO/TC 34/SC 2 |
Rapeseed and rapeseed meals — Determination of glucosinolates content — Method using high-performance liquid chromatography |
ISO 9167:2019 |
9167 |
1 |
2019 |
SDG 2
|
| IEC |
TC 46/SC 46A |
Coaxial communication cables - Part 1-111: Electrical test methods - Stability of phase test methods |
IEC 61196-1-111:2014 |
61196-1-111:2014 |
2 |
2014 |
SDG 9
|
| IEC |
TC 47/SC 47E |
Semiconductor devices - Part 16-2: Microwave integrated circuits - Frequency prescalers |
IEC 60747-16-2:2001 |
60747-16-2:2001 |
1 |
2001 |
SDG 3, 8, 9, 15
|
| ISO |
ISO/IEC JTC 1/SC 42 |
Information technology — Artificial intelligence — Transparency taxonomy of AI systems |
ISO/IEC NP 12792 |
12792 |
1 |
|
SDG 9
|
| ISO |
ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings |
ISO 15874-3:2013 |
15874 |
2 |
2013 |
SDG 9
|
| ISO |
ISO/TC 106/SC 4 |
Dentistry — Test methods for rotary instruments |
ISO 8325:2004 |
8325 |
2 |
2004 |
SDG 3
|
| ASTM |
D19.04 |
Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant |
D7727 |
D7727 |
|
2021 |
SDG 6
|
| ISO |
ISO/TC 150 |
Implants for surgery — Cleanliness of orthopedic implants — General requirements |
ISO 19227:2018 |
19227 |
1 |
2018 |
SDG 3
|
| ISO |
ISO/TC 108 |
Mechanical vibration and shock — Signal processing — Part 1: General introduction |
ISO 18431-1:2005 |
18431 |
1 |
2005 |
SDG 4
|
| IEC |
TC 42 |
High-current test techniques - Definitions and requirements for test currents and measuring systems |
IEC 62475:2010 |
62475:2010 |
1 |
2010 |
SDG 7, 9
|
| IEC |
TC 34/SC 34A |
Glow-starters for fluorescent lamps |
IEC 60155:1993 |
60155:1993 |
4 |
1993 |
SDG 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17
|
| IEC |
TC 62/SC 62B |
Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis |
IEC 60613:2010 |
60613:2010 |
3 |
2010 |
SDG 3
|
