ISO |
ISO/TC 20 |
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, light duty — Inch series |
ISO 14207:1998 |
14207 |
1 |
1998 |
SDG 9
|
ISO |
ISO/TC 59 |
Performance standards in building — Presentation of performance levels of facades made of same-source components |
ISO 7361:1986 |
7361 |
1 |
1986 |
SDG 11
|
ISO |
ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure |
ISO/AWI 13265 |
13265 |
2 |
2022 |
SDG 6
|
IEC |
TC 49 |
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method |
IEC 62884-2:2017 |
62884-2:2017 |
1 |
2017 |
SDG 9, 11
|
ISO |
ISO/TC 43/SC 1 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
ISO 10846-5:2008 |
10846 |
1 |
2008 |
SDG 9
|
ISO |
ISO/TC 146/SC 3 |
Ambient air — Gas phase titration — Calibration of analysers for ozone |
ISO 15337:2009 |
15337 |
1 |
2009 |
SDG 13
|
ISO |
ISO/TC 186 |
Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys |
ISO 8442-7:2000 |
8442 |
1 |
2000 |
SDG 3
|
ISO |
ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl ch |
ISO 6259-2:2020 |
6259 |
2 |
2020 |
SDG 9
|
IEC |
TC 82 |
Recommendations for renewable energy and hybrid systems for rural electrification - Part 2: From requirements to a range of electrification systems |
IEC TS 62257-2:2015 |
62257-2:2015 |
2 |
2015 |
SDG 7, 9, 13
|
IEC |
TC 91 |
Device embedded substrate - Part 1-1: Generic specification - Test methods |
IEC 62878-1-1:2015 |
62878-1-1:2015 |
1 |
2015 |
SDG 3, 7, 9
|
ISO |
ISO/TC 71/SC 5 |
Simplified design of prestressed concrete tanks for potable water |
ISO 18407:2018 |
18407 |
1 |
2018 |
SDG 6
|
ISO |
ISO/TC 8/SC 6 |
Ships and marine technology — Marine radar reflectors — Part 2: Active type |
ISO 8729-2:2009 |
8729 |
1 |
2009 |
SDG 9
|
IEC |
TC 20 |
Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (U<sub>m</sub> = 36 kV) up to and including 500 kV (U<sub>m</sub> = 550 kV) |
IEC TR 61901:2016 |
61901:2016 |
2 |
2016 |
SDG 7
|
ISO |
ISO/TC 211 |
Geographic information — Land Administration Domain Model (LADM) — Part 5: Spatial plan information |
ISO/PWI 19152-5 |
19152 |
1 |
|
SDG 9
|
ISO |
ISO/TC 134 |
Solid fertilizers — Determination of mineral-acid-soluble sulfate content — Gravimetric method |
ISO 10084:1992 |
10084 |
1 |
1992 |
SDG 2
|
ISO |
ISO/TC 119/SC 4 |
Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) |
ISO 7627-2:1983 |
7627 |
1 |
1983 |
SDG 9
|
ISO |
ISO/TC 127/SC 2 |
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk Area and Risk Level for Track movement and Swing/rotation |
ISO/PWI 21815-4 |
21815 |
1 |
|
SDG 8
|
ISO |
ISO/TC 28 |
Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 1: Spray flame persistence — Hollow-cone nozzle method |
ISO 15029-1:1999 |
15029 |
1 |
1999 |
SDG 8
|
IEC |
TC 86/SC 86B |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components |
IEC 61300-3-7:2021 |
61300-3-7:2021 |
3 |
2021 |
SDG 9
|
ISO |
ISO/TC 45/SC 4 |
Rubber- or plastics-covered rollers — Glossary |
ISO/TR 8517:1988 |
8517 |
1 |
1988 |
SDG 9
|
ISO |
ISO/TC 220 |
Cryogenic vessels — Cleanliness for cryogenic service — Amendment 1: Cryogenic vessels — Cleanliness for cryogenic service — Amendment 1 |
ISO 23208:2017/Amd 1:2020 |
23208 |
2 |
2020 |
SDG 3
|
ISO |
ISO/TC 22/SC 39 |
Passenger cars — Lateral spacing of foot controls |
ISO 3409:1975 |
3409 |
1 |
1975 |
SDG 9
|
ISO |
ISO/TC 219 |
Laminate floor coverings — Determination of geometrical characteristics |
ISO 24337:2019 |
24337 |
2 |
2019 |
SDG 9
|
ISO |
ISO/TC 178 |
Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity |
ISO 22200:2009 |
22200 |
2 |
2009 |
SDG 9
|
ASTM |
D18.21 |
Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements--Diagrams for Single Analyses |
D5738 |
D5738 |
|
1995(2006) |
SDG 6
|