| IEC |
TC 48/SC 48B |
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength |
IEC 60512-16-3:2008 |
60512-16-3:2008 |
1 |
2008 |
SDG 3, 4, 6, 7, 9, 11, 12, 13, 16, 17
|
| ISO |
ISO/TC 45/SC 2 |
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
ISO 1431-3:2017 |
1431 |
2 |
2017 |
SDG 9
|
| IEC |
TC 86/SC 86B |
Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance |
IEC 61753-1:2018 |
61753-1:2018 |
2 |
2018 |
SDG 9
|
| ISO |
ISO/TC 182 |
Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test |
ISO 22476-7:2012 |
22476 |
1 |
2012 |
SDG 9
|
| ISO |
ISO/TC 48 |
Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use |
ISO 4787:2021 |
4787 |
3 |
2021 |
SDG 9
|
| IEC |
TC 48/SC 48B |
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force |
IEC 60512-15-4:2008 |
60512-15-4:2008 |
1 |
2008 |
SDG 3, 4, 6, 7, 9, 11, 12, 13, 16, 17
|
| ISO |
ISO/IEC JTC 1/SC 7 |
Information technology — CDIF framework — Part 2: Modelling and extensibility |
ISO/IEC 15474-2:2002 |
15474 |
1 |
2002 |
SDG 9
|
| ISO |
ISO/TC 106/SC 6 |
Dentistry — Portable dental equipment for use in non‐permanent healthcare environment — Part 1: General requirements |
ISO 23402-1:2020 |
23402 |
1 |
2020 |
SDG 3
|
| ISO |
ISO/TC 20/SC 4 |
Aerospace — Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient |
ISO 3191:1998 |
3191 |
2 |
1998 |
SDG 9
|
| ISO |
ISO/TC 20/SC 10 |
Aerospace — Metric series pipe coupling 8°30' up to 28 000 kPa dynamic beam seal — Technical specification |
ISO 24568:2021 |
24568 |
1 |
2021 |
SDG 9
|
| ISO |
ISO/TC 107 |
Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
ISO 2819:2017 |
2819 |
3 |
2017 |
SDG 9
|
| ISO |
ISO/TC 20/SC 10 |
Aerospace — Hydraulic system tubing — Qualification tests for bent tubes |
ISO 8574:2004 |
8574 |
2 |
2004 |
SDG 9
|
| IEC |
TC 82 |
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
IEC 61730-1:2016 |
61730-1:2016 |
2 |
2016 |
SDG 7, 9, 13
|
| IEC |
TC 40 |
Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors |
IEC 60115-8:2009 |
60115-8:2009 |
2 |
2009 |
SDG 10, 12, 17
|
| ISO |
ISO/IEC JTC 1/SC 6 |
Telecommunications and information exchange between systems — Wireless LAN Access Control — Part 2: Technical specification for dispatching platform |
ISO/IEC CD 5021-2 |
5021 |
1 |
2022 |
SDG 9
|
| ISO |
ISO/TC 118/SC 3 |
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers |
ISO/PWI 28927-2 |
28927 |
2 |
|
SDG 9
|
| ISO |
ISO/TC 260 |
Human Resource Management — Workforce Data Quality Standard |
ISO/CD 30435 |
30435 |
1 |
|
SDG 3
|
| ISO |
ISO/TC 20/SC 9 |
Aircraft — Ground service connections — Locations and types |
ISO 10842:2017 |
10842 |
2 |
2017 |
SDG 9
|
| ISO |
ISO/TC 267 |
Technology in facility management — Scope, key concepts and benefits |
ISO/AWI TR 41016 |
41016 |
1 |
2023 |
SDG 4
|
| ASTM |
D19.06 |
Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatograp |
D7597 |
D7597 |
|
2016(2017) |
SDG 6
|
| ISO |
ISO/TC 160/SC 1 |
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass |
ISO 12543-2 |
12543 |
3 |
2021 |
SDG 9
|
| ISO |
ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Driving squares — Part 2: Driving squares for power socket tools |
ISO 1174-2:1996 |
1174 |
1 |
1996 |
SDG 8
|
| ISO |
ISO/TC 229 |
Nanotechnologies — Standard terms and their definition for cellulose nanomaterial |
ISO/AWI TS 20477 |
20477 |
2 |
|
SDG 3
|
| ISO |
ISO/TC 198 |
Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
ISO 11137-2:2013 |
11137 |
3 |
2013 |
SDG 3
|
| IEC |
TC 47/SC 47E |
Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches |
IEC 60747-16-4:2004 |
60747-16-4:2004 |
1 |
2004 |
SDG 3, 8, 9, 15
|
