ISO |
ISO/TC 30 |
Measurement of liquid flow in closed conduits — Weighing method |
ISO 4185:1980 |
4185 |
1 |
1980 |
SDG 9
|
ISO |
ISO/TC 38/SC 2 |
Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning |
ISO 3175-4:2018 |
3175 |
2 |
2018 |
SDG 9
|
ISO |
ISO/TC 22/SC 41 |
Road vehicles — Compressed natural gas (CNG) refuelling connector |
ISO 14469:2017 |
14469 |
1 |
2017 |
SDG 9
|
ISO |
ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope |
ISO 2128:2010 |
2128 |
2 |
2010 |
SDG 9
|
ISO |
ISO/TC 2 |
Closed end blind rivets with break pull mandrel and protruding head — St/St |
ISO 15976:2002 |
15976 |
1 |
2002 |
SDG 9
|
ISO |
ISO/TC 146/SC 6 |
Indoor air — Part 11: Determination of emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimen |
ISO/WD 16000-11 |
16000 |
2 |
2023 |
SDG 3
|
IEC |
TC 86/SC 86B |
Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family |
IEC 61754-2:1996 |
61754-2:1996 |
1 |
1996 |
SDG 9
|
ISO |
ISO/TC 131/SC 4 |
Connections for hydraulic fluid power and general use — Hose fittings — Part 4: Hose fittings with ISO 6149 metric stud ends |
ISO 12151-4:2007 |
12151 |
1 |
2007 |
SDG 9
|
ISO |
ISO/TC 138/SC 1 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE) |
ISO 8283-2:1992 |
8283 |
1 |
1992 |
SDG 6
|
ISO |
ISO/TC 20/SC 14 |
Space systems — Surface cleanliness of fluid systems — Part 6: Precision-cleaning processes |
ISO 14952-6:2003 |
14952 |
1 |
2003 |
SDG 9
|
ISO |
ISO/TC 260 |
Human resource management — Diversity and inclusion |
ISO 30415:2021 |
30415 |
1 |
2021 |
SDG 5
|
ISO |
ISO/TC 110/SC 4 |
Industrial trucks — Verification of stability — Part 25: Rough-terrain variable-reach trucks operating in the special condition of handling freely suspended loads |
ISO/WD 22915-25 |
22915 |
1 |
2022 |
SDG 8
|
ISO |
ISO/IEC JTC 1/SC 6 |
Basic mode control procedures — Complements |
ISO 2628:1973 |
2628 |
1 |
1973 |
SDG 9
|
IEC |
TC 86/SC 86A |
Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables |
IEC 60794-3-10:2015 |
60794-3-10:2015 |
3 |
2015 |
SDG 1, 4, 5, 7, 8, 9, 10, 11, 12, 13, 17
|
ISO |
ISO/TC 182 |
Geotechnical investigation and testing — Geohydraulic testing — Part 2: Water permeability tests in a borehole using open systems |
ISO 22282-2:2012 |
22282 |
1 |
2012 |
SDG 9
|
ISO |
ISO/IEC JTC 1/SC 31 |
Information technology — Automatic identification and data capture techniques — Part 12: Crypto suite ECC-DH security services for air interface communications |
ISO/IEC 29167-12:2015 |
29167 |
1 |
2015 |
SDG 9
|
ISO |
ISO/TC 163/SC 2 |
Thermal performance of building components — Dynamic thermal characteristics — Calculation methods |
ISO 13786:2017 |
13786 |
3 |
2017 |
SDG 9
|
ISO |
ISO/TC 94/SC 13 |
Protective clothing for users of hand-held chainsaws — Part 4: Performance requirements and test methods for protective gloves |
ISO 11393-4:2018 |
11393 |
2 |
2018 |
SDG 3
|
ISO |
ISO/TC 98/SC 3 |
Determination of imposed floor loads in production buildings and warehouses |
ISO 2633:1974 |
2633 |
1 |
1974 |
SDG 9
|
IEC |
TC 112 |
Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests |
IEC 60243-3:2013 |
60243-3:2013 |
3 |
2013 |
SDG 7, 9, 12
|
ISO |
ISO/IEC JTC 1 |
Information processing — Magnetic disk for data storage devices — 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter |
ISO 7298:1985 |
7298 |
1 |
1985 |
SDG 8
|
ISO |
ISO/TC 59/SC 13 |
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) — Information management using building information modelling — Part 2: Delivery phase of the assets |
ISO 19650-2:2018 |
19650 |
1 |
2018 |
SDG 9
|
ISO |
ISO/IEC JTC 1/SC 7 |
Software and systems engineering — Certification of software and systems engineering professionals — Part 3: Systems engineering |
ISO/IEC 24773-3:2021 |
24773 |
1 |
2021 |
SDG 9
|
ISO |
ISO/IEC JTC 1/SC 39 |
Information technology — Data centres — Key performance indicators — Part 5: IT Equipment Utilization for servers (ITEUsv) |
ISO/IEC 30134-5:2017 |
30134 |
1 |
2017 |
SDG 9
|
ISO |
ISO/IEC JTC 1 |
Information technology — UPnP Device Architecture — Part 1: UPnP Device Architecture Version 1.0 |
ISO/IEC 29341-1:2011 |
29341 |
2 |
2011 |
SDG 8
|