ISO |
ISO/TC 92/SC 4 |
Fire safety engineering — Assessment, verification and validation of calculation methods — Part 3: Example of a CFD model |
ISO/TR 16730-3:2013 |
16730 |
1 |
2013 |
SDG 9
|
ISO |
ISO/TC 10/SC 1 |
Geometrical product specifications (GPS) — Numbering specifications |
ISO/AWI 7533 |
7533 |
1 |
2024 |
SDG 9
|
IEC |
TC 96 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites |
IEC 61558-2-23:2010 |
61558-2-23:2010 |
2 |
2010 |
SDG 7, 9, 11
|
ISO |
ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens |
ISO 7539-3:1989 |
7539 |
1 |
1989 |
SDG 7
|
ISO |
ISO/TC 22/SC 33 |
Road vehicles — Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
ISO 4929:1978 |
4929 |
1 |
1978 |
SDG 9
|
IEC |
TC 55 |
Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155 |
IEC 60317-60-1:2020 |
60317-60-1:2020 |
1 |
2020 |
SDG 9
|
ISO |
ISO/TC 171/SC 1 |
Electronic document management — Vocabulary — Part 2: Workflow management |
ISO 12651-2:2014 |
12651 |
1 |
2014 |
SDG 9
|
IEC |
TC 47/SC 47A |
Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
IEC 62132-1:2015 |
62132-1:2015 |
2 |
2015 |
SDG 9
|
ISO |
ISO/TC 172/SC 7 |
Ophthalmic optics — Contact lens care products — Antimicrobial preservative efficacy testing and guidance on determining discard date |
ISO 14730:2014 |
14730 |
2 |
2014 |
SDG 3
|
ISO |
ISO/TC 20/SC 10 |
Aerospace — Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) — Procurement specification |
ISO 23933:2006 |
23933 |
1 |
2006 |
SDG 9
|
ISO |
ISO/TC 79 |
Magnesium alloys — Determination of zinc — Volumetric method |
ISO 1783:1973 |
1783 |
1 |
1973 |
SDG 9
|
ISO |
ISO/TC 23/SC 19 |
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer |
ISO 11783-3:2018 |
11783 |
4 |
2018 |
SDG 1
|
ISO |
ISO/TC 127/SC 1 |
Earth-moving machinery and rough-terrain variable-reach trucks — Design requirements for machines intended to be driven on road |
ISO 17253:2014 |
17253 |
1 |
2014 |
SDG 8
|
ISO |
ISO/TC 166 |
Glass hollowware in contact with food — Release of lead and cadmium — Part 1: Test method |
ISO 7086-1:2019 |
7086 |
3 |
2019 |
SDG 3
|
ISO |
ISO/TC 157 |
Male condoms — Requirements and test methods for condoms made from synthetic materials |
ISO 23409:2011 |
23409 |
1 |
2011 |
SDG 3
|
ISO |
ISO/TC 28 |
Petroleum products and related products — Determination of the mechanical stability of greases in presence of water |
ISO/NP 12921 |
12921 |
1 |
|
SDG 9
|
IEC |
TC 113 |
Nanomanufacturing - Key control characteristics - Part 2-4: Carbon nanotube materials - Test methods for determination of resistance of individual carbon nanotubes |
IEC TS 62607-2-4:2020 |
62607-2-4:2020 |
1 |
2020 |
SDG 9
|
ISO |
ISO/TC 22/SC 33 |
Road vehicles — Labelling of containers for petroleum-based or non-petroleum-based brake fluid |
ISO 3871:2000 |
3871 |
4 |
2000 |
SDG 9
|
ISO |
ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General |
ISO 15874-1:2013 |
15874 |
2 |
2013 |
SDG 9
|
ISO |
ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 4: Basic symbols |
ISO 4378-4:2009 |
4378 |
2 |
2009 |
SDG 11
|
IEC |
TC 21 |
Safety requirements for secondary batteries and battery installations - Part 6: Safe operation of lithium-ion batteries in traction applications |
IEC 62485-6:2021 |
62485-6:2021 |
1 |
2021 |
SDG 1, 2, 7, 8, 9, 11, 12, 13
|
IEC |
TC 40 |
Fixed resistors for use in electronic equipment. Part 7: Sectional specification: Fixed resistor networks in which not all resistors are individually measurable |
IEC 60115-7:1984 |
60115-7:1984 |
1 |
1984 |
SDG 10, 12, 17
|
ISO |
ISO/TC 20/SC 4 |
Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature) |
ISO 10096:1997 |
10096 |
1 |
1997 |
SDG 9
|
ISO |
ISO/TC 35/SC 16 |
Paints and varnishes — Determination of preservatives in water-dilutable coating materials — Part 2: Determination of in-can total formaldehyde |
ISO/AWI 7012-2 |
7012 |
1 |
2024 |
SDG 3
|
ISO |
ISO/TC 281 |
Fine bubble technology — Storage and transportation of ultrafine bubble dispersion in water |
ISO 21255:2018 |
21255 |
1 |
2018 |
SDG 2
|