| ISO |
ISO/TC 138/SC 2 |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 3: Fittings |
ISO/AWI TS 16422-3 |
16422 |
1 |
2023 |
SDG 6
|
| ISO |
ISO/TC 20 |
Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty — Inch series |
ISO 14197:1998 |
14197 |
1 |
1998 |
SDG 9
|
| ISO |
ISO/TC 59 |
Joints in building — Fundamental principles for design |
ISO 2445:1972 |
2445 |
1 |
1972 |
SDG 11
|
| ISO |
ISO/TC 184/SC 4 |
Data quality — Part 114: Master data: Application of ISO/IEC 21778 and ISO 8000-115 to portable data |
ISO/NP 8000-114.2 |
8000 |
1 |
|
SDG 9
|
| ISO |
ISO/TC 45/SC 2 |
Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance |
ISO/DIS 4664-1 |
4664 |
3 |
2022 |
SDG 9
|
| ISO |
ISO/TC 150/SC 4 |
Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test |
ISO/AWI 14243-1 |
14243 |
3 |
2024 |
SDG 3
|
| ISO |
ISO/TC 22/SC 35 |
Road vehicles — Requirements for automotive display systems |
ISO/AWI TS 8231 |
8231 |
1 |
2023 |
SDG 9
|
| ISO |
ISO/TC 127/SC 2 |
Earth-moving machinery — Laboratory tests and performance requirements for protective structures of excavators — Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t |
ISO 12117-2:2008 |
12117 |
1 |
2008 |
SDG 8
|
| IEC |
TC 48/SC 48B |
Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock |
IEC 60512-6-3:2002 |
60512-6-3:2002 |
1 |
2002 |
SDG 3, 4, 6, 7, 9, 11, 12, 13, 16, 17
|
| ISO |
ISO/IEC JTC 1/SC 6 |
Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-3: High data rate wireless multi-media networks |
ISO/IEC/IEEE 8802-15-3:2017 |
8802 |
1 |
2017 |
SDG 9
|
| ISO |
ISO/TC 20/SC 4 |
Aerospace — Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 |
ISO 3223:1998 |
3223 |
2 |
1998 |
SDG 9
|
| ISO |
ISO/TC 134 |
Fertilizer and soil conditioners — Fertilizer grade urea — General requirements |
ISO 18642:2016 |
18642 |
1 |
2016 |
SDG 2
|
| ISO |
ISO/TC 34/SC 15 |
Roasted ground coffee — Determination of moisture content — Karl Fischer method (Reference method) |
ISO 11817:1994 |
11817 |
1 |
1994 |
SDG 3
|
| ISO |
ISO/TC 43 |
Acoustics — Reference zero for the calibration of audiometric equipment — Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones |
ISO 389-2:1994 |
389 |
1 |
1994 |
SDG 3
|
| IEC |
TC 51 |
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 2: Transformers and inductors using YEx-2 laminations for printed wiring board mounting |
IEC 60852-2:1992 |
60852-2:1992 |
1 |
1992 |
SDG 9
|
| IEC |
TC 49 |
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method |
IEC 62884-2:2017 |
62884-2:2017 |
1 |
2017 |
SDG 9, 11
|
| ISO |
ISO/TC 131/SC 6 |
Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow |
ISO 3968:2017 |
3968 |
3 |
2017 |
SDG 9
|
| IEC |
TC 48/SC 48D |
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
IEC 61587-1:2016 |
61587-1:2016 |
4 |
2016 |
SDG 9
|
| IEC |
TC 66 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems |
IEC 61010-2-091:2019 |
61010-2-091:2019 |
2 |
2019 |
SDG 3, 8, 9, 11
|
| ISO |
ISO/TC 20/SC 14 |
Space systems — Fluid characteristics, sampling and test methods — Part 11: Ammonia |
ISO 15859-11:2004 |
15859 |
1 |
2004 |
SDG 9
|
| UNECE |
Working Party on Agricultural Quality Standards (WP.7) |
Hazelnuts, Inshell Standard |
DDP-03 |
DDP-03 |
|
2007 |
SDG 12
|
| ISO |
ISO/TC 167 |
Steel structures — Execution of structural steelwork — Part 4: Erection |
ISO/CD 17607-4 |
17607 |
1 |
|
SDG 9
|
| ISO |
ISO/TC 43 |
Acoustics — Hearing aid fitting management (HAFM) |
ISO 21388:2020 |
21388 |
1 |
2020 |
SDG 3
|
| ISO |
ISO/TC 161 |
Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 4: Valve-proving systems for automatic shut-off valves |
ISO 23551-4:2018 |
23551 |
2 |
2018 |
SDG 9
|
| ISO |
ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Determination of isotactic index |
ISO 9113:2019 |
9113 |
2 |
2019 |
SDG 9
|
