ISO |
ISO/TC 22/SC 36 |
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 3: Mechanical requirements for electronic subsystems |
ISO/CD 15830-3 |
15830 |
3 |
|
SDG 9
|
ISO |
ISO/TC 146/SC 3 |
Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods |
ISO 22262-2:2014 |
22262 |
1 |
2014 |
SDG 3
|
ISO |
ISO/TC 172/SC 7 |
Ophthalmic instruments — Trial frames |
ISO 12867:2010 |
12867 |
2 |
2010 |
SDG 3
|
IEC |
TC 22/SC 22F |
High-voltage direct current (HVDC) installations - System tests |
IEC 61975:2010 |
61975:2010 |
1 |
2010 |
SDG 1, 2, 3, 7, 8, 9, 11, 12, 17
|
ISO |
ISO/TC 59/SC 8 |
Buildings and civil engineering works — Determination of the staining of porous substrates by sealants used in joints — Part 1: Test with compression |
ISO 16938-1:2019 |
16938 |
2 |
2019 |
SDG 9
|
ISO |
ISO/TC 168 |
Prosthetics and orthotics — Functional deficiencies — Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis |
ISO 8551:2020 |
8551 |
2 |
2020 |
SDG 3
|
ISO |
ISO/TC 206 |
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending fatigue of porous ceramics at room temperature |
ISO 28704:2011 |
28704 |
1 |
2011 |
SDG 9
|
ISO |
ISO/TC 83 |
Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods |
ISO/DIS 25649-1 |
25649 |
2 |
2022 |
SDG 3
|
ISO |
ISO/TC 178 |
Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators) |
ISO/PWI 25745-2 |
25745 |
2 |
|
SDG 7
|
ISO |
ISO/IEC JTC 1/SC 29 |
Information technology — MPEG audio technologies — Part 4: Dynamic range control |
ISO/IEC 23003-4:2020 |
23003 |
2 |
2020 |
SDG 8
|
ISO |
ISO/TC 106/SC 4 |
Dentistry — Powered scaler |
ISO/AWI 18397 |
18397 |
2 |
2024 |
SDG 3
|
ISO |
ISO/IEC JTC 1/SC 6 |
Telecommunications and information exchange between systems — Specific requirements for local and metropolitan area networks — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications |
ISO/IEC/IEEE DIS 8802-11 |
8802 |
3 |
|
SDG 9
|
ISO |
ISO/TC 157 |
Prophylactic dams — Requirements and test methods |
ISO 29942:2011 |
29942 |
1 |
2011 |
SDG 3
|
ISO |
ISO/TC 59/SC 8 |
Building and civil engineering sealants — Determination of the degree of cure — Part 1: Build-up of tensile properties in dumbbell-shaped specimens |
ISO 24068-1:2021 |
24068 |
1 |
2021 |
SDG 9
|
IEC |
TC 103 |
Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulators in wireless communication and broadcasting systems |
IEC PAS 62593:2008 |
62593:2008 |
1 |
2008 |
SDG 8, 9
|
IEC |
TC 45/SC 45B |
Radiation protection instrumentation - Equipment for monitoring airborne tritium |
IEC 62303:2008 |
62303:2008 |
1 |
2008 |
SDG 8
|
IEC |
TC 7 |
Overhead lines - Methods for testing self-damping characteristics of conductors |
IEC 62567:2013 |
62567:2013 |
1 |
2013 |
SDG 7, 9
|
ISO |
ISO/TC 215 |
Health informatics — Point-of-care medical device communication — Part 10102: Nomenclature — Annotated ECG |
ISO/IEEE 11073-10102:2014 |
11073 |
1 |
2014 |
SDG 3
|
ISO |
ISO/TC 17/SC 16 |
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
ISO 14656:1999 |
14656 |
1 |
1999 |
SDG 6
|
ISO |
ISO/TC 94/SC 15 |
Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical resistance/strength of components and connections |
ISO 16900-6:2015 |
16900 |
1 |
2015 |
SDG 3
|
ISO |
ISO/TC 130 |
Graphic technology — Ink, paper and labels — Requirements on hot alkali penetration and resistance |
ISO 12632:2015 |
12632 |
1 |
2015 |
SDG 12
|
IEC |
TC 46/SC 46C |
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification |
IEC 62255-2:2005 |
62255-2:2005 |
1 |
2005 |
SDG 4, 9, 11
|
IEC |
TC 46/SC 46A |
Coaxial communication cables - Part 1-119: Electrical test methods - RF average power rating |
IEC 61196-1-119:2020 |
61196-1-119:2020 |
2 |
2020 |
SDG 9
|
IEC |
TC 20 |
Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles |
IEC 60332-1-3:2004 |
60332-1-3:2004 |
1 |
2004 |
SDG 7, 11
|
ASTM |
D19.08 |
Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
D3087 |
D3087 |
|
2017 |
SDG 6
|