ISO |
ISO/TC 76 |
Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification |
ISO 719:2020 |
719 |
3 |
2020 |
SDG 3
|
ISO |
ISO/TC 45/SC 3 |
Medical gloves made from natural rubber latex — Determination of water-extractable protein using the modified Lowry method |
ISO 12243:2003 |
12243 |
1 |
2003 |
SDG 9
|
ISO |
ISO/IEC JTC 1 |
Information technology — UPnP Device Architecture — Part 20-2: Audio video device control protocol — Level 4 — Media renderer device |
ISO/IEC 29341-20-2:2017 |
29341 |
1 |
2017 |
SDG 8
|
IEC |
TC 33 |
Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application |
IEC 60358-2:2013 |
60358-2:2013 |
1 |
2013 |
SDG 7, 9
|
ISO |
ISO/TC 31 |
Tyres, valves and tubes — List of equivalent terms — Part 1: Tyres |
ISO 3877-1:1997 |
3877 |
2 |
1997 |
SDG 9
|
ISO |
ISO/TC 220 |
Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
ISO/FDIS 21009-1 |
21009 |
2 |
2021 |
SDG 3
|
ISO |
ISO/TC 206 |
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders |
ISO 17947:2014 |
17947 |
1 |
2014 |
SDG 9
|
ASTM |
D19.08 |
Test Methods for Autoclavability of Membrane Filters |
D4199 |
D4199 |
|
1982(2011) |
SDG 6
|
ISO |
ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes |
ISO 14531-1:2002 |
14531 |
1 |
2002 |
SDG 9
|
IEC |
TC 4 |
Hydraulic turbines - Testing of control systems |
IEC 60308:2005 |
60308:2005 |
2 |
2005 |
SDG 7, 8, 13
|
ISO |
ISO/TC 59/SC 14 |
Buildings and constructed assets — Service life planning — Part 5: Life-cycle costing |
ISO 15686-5:2017 |
15686 |
2 |
2017 |
SDG 9
|
ISO |
ISO/TC 93 |
Starches and derived products — Determination of sulfur dioxide content — Acidimetric method and nephelometric method |
ISO 5379:2013 |
5379 |
2 |
2013 |
SDG 2
|
ISO |
ISO/TC 2/SC 11 |
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
ISO 7046-2:2011 |
7046 |
2 |
2011 |
SDG 9
|
ISO |
ISO/TC 28 |
Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing |
ISO 26422:2014 |
26422 |
2 |
2014 |
SDG 8
|
IEC |
TC 48/SC 48B |
Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections |
IEC 60512-11-13:2002 |
60512-11-13:2002 |
1 |
2002 |
SDG 3, 4, 6, 7, 9, 11, 12, 13, 16, 17
|
IEC |
TC 47/SC 47F |
Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS |
IEC 62047-4:2008 |
62047-4:2008 |
1 |
2008 |
SDG 6, 9, 13, 17
|
ISO |
ISO/TC 8/SC 8 |
Ships and marine technology — Wire rope lifting platform for inspection |
ISO/NP 9557 |
9557 |
1 |
|
SDG 9
|
IEC |
TC 73 |
Short-circuit currents - Calculation of effects - Part 2: Examples of calculation |
IEC TR 60865-2:2015 |
60865-2:2015 |
2 |
2015 |
SDG 7, 9, 11
|
ISO |
ISO/TC 61/SC 11 |
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods |
ISO/FDIS 15527 |
15527 |
4 |
2022 |
SDG 9
|
ISO |
ISO/TC 2 |
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications |
ISO 3506-5 |
3506 |
1 |
|
SDG 9
|
IEC |
TC 62/SC 62D |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
IEC 60601-2-19:2020 |
60601-2-19:2020 |
3 |
2020 |
SDG 3
|
IEC |
TC 113 |
Test methods for the characterization of organic transistors and materials |
IEC 62860:2013 |
62860:2013 |
1 |
2013 |
SDG 9
|
ISO |
ISO/TC 121/SC 6 |
Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems |
ISO 9170-2:2008 |
9170 |
2 |
2008 |
SDG 3
|
ISO |
ISO/TC 29/SC 8 |
Tools for moulding — Guide bushes, headed, and locating guide bushes, headed |
ISO 8018:2007 |
8018 |
2 |
2007 |
SDG 8
|
ISO |
ISO/TC 218 |
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests |
ISO 13061-2:2014 |
13061 |
1 |
2014 |
SDG 9
|