ISO |
ISO/TC 134 |
Fertilizers and soil conditioners — Determination of total nitrogen by combustion |
ISO 20620:2021 |
20620 |
1 |
2021 |
SDG 9
|
ISO |
ISO/TC 45/SC 1 |
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
ISO 11424:2017 |
11424 |
2 |
2017 |
SDG 7
|
ISO |
ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for determining backgrounds |
ISO/CD TR 18392 |
18392 |
2 |
|
SDG 9
|
ISO |
ISO/TC 190/SC 3 |
Soil quality — Determination of herbicides — Method using HPLC with UV-detection |
ISO 11264:2005 |
11264 |
1 |
2005 |
SDG 15
|
IEC |
TC 48/SC 48B |
Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump |
IEC 60512-6-2:2002 |
60512-6-2:2002 |
1 |
2002 |
SDG 3, 4, 6, 7, 9, 11, 12, 13, 16, 17
|
ISO |
ISO/TC 38 |
Textiles and textile products — Microplastics from textile sources — Part 1: Determination of material loss from fabrics during washing |
ISO/DIS 4484-1 |
4484 |
1 |
2022 |
SDG 3
|
IEC |
TC 95 |
Measuring relays and protection equipment - Part 1: Common requirements |
IEC 60255-1:2009 |
60255-1:2009 |
1 |
2009 |
SDG 7, 8
|
ISO |
ISO/TC 35/SC 9 |
Paints and varnishes — Cross-cut test |
ISO 2409:2020 |
2409 |
5 |
2020 |
SDG 9
|
ISO |
ISO/TC 156 |
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements |
ISO 17475:2005 |
17475 |
1 |
2005 |
SDG 8
|
IEC |
TC 86/SC 86B |
Connectors for optical fibres and cables - Part 14-9: Fibre optic connector type SC-APC tuned 8° terminated on single mode fibre type B1 - Detail specification |
IEC 60874-14-9:1999 |
60874-14-9:1999 |
1 |
1999 |
SDG 9
|
ISO |
ISO/TC 172/SC 3 |
Optics and photonics — Test method for refractive index of optical glasses — Part 1: Minimum deviation method |
ISO 21395-1:2020 |
21395 |
1 |
2020 |
SDG 9
|
IEC |
TC 51 |
Ferrite cores - Standard inductance factor for gapped cores and its tolerance |
IEC 62358:2012 |
62358:2012 |
2 |
2012 |
SDG 9
|
IEC |
TC 48/SC 48B |
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
IEC 60512-1-100:2012 |
60512-1-100:2012 |
3 |
2012 |
SDG 3, 4, 6, 7, 9, 11, 12, 13, 16, 17
|
ISO |
ISO/TC 146/SC 2 |
Workplace Atmospheres — Part 1: Gas detectors — Performance requirements of detectors for toxic gases |
IEC 62990-1:2019 |
62990 |
1 |
2019 |
SDG 3
|
IEC |
TC 48/SC 48B |
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing |
IEC 60603-4:1987 |
60603-4:1987 |
1 |
1987 |
SDG 3, 4, 6, 7, 9, 11, 12, 13, 16, 17
|
ISO |
ISO/IEC JTC 1/SC 6 |
Information technology — Telecommunications and information exchange between systems — Services for Computer Supported Telecommunications Applications (CSTA) Phase III |
ISO/IEC 18051:2012 |
18051 |
6 |
2012 |
SDG 9
|
IEC |
TC 40 |
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric DC capacitors |
IEC 60384-16:2019 |
60384-16:2019 |
3 |
2019 |
SDG 10, 12, 17
|
ISO |
ISO/IEC JTC 1/SC 6 |
Information technology — Data communication — 37-pole DTE/DCE interface connector and contact number assignments |
ISO 4902:1989 |
4902 |
2 |
1989 |
SDG 9
|
ISO |
ISO/IEC JTC 1/SC 6 |
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Name identification supplementary services |
ISO/IEC 13864:1995 |
13864 |
1 |
1995 |
SDG 9
|
ISO |
ISO/TC 43/SC 1 |
Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers |
ISO 13473-3:2002 |
13473 |
1 |
2002 |
SDG 9
|
ISO |
ISO/TC 172/SC 5 |
Optics and optical instruments — Vocabulary for microscopy — Part 1: Light microscopy |
ISO 10934-1:2002 |
10934 |
1 |
2002 |
SDG 9
|
ISO |
ISO/TC 134 |
Carbonate liming materials — Determination of reactivity — Automatic titration method with citric acid |
ISO 22146:2018 |
22146 |
1 |
2018 |
SDG 2
|
ISO |
ISO/TC 67/SC 2 |
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 2: Clad fittings |
ISO/DIS 24139-2 |
24139 |
1 |
2022 |
SDG 9
|
ISO |
ISO/TC 159/SC 4 |
Ergonomics of human-system interaction — Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress |
ISO/TS 9241-430 |
9241 |
1 |
2021 |
SDG 3
|
ISO |
ISO/TC 204 |
Intelligent transport systems — Localized communications — Part 2: Legacy system support |
ISO 29281-2:2019 |
29281 |
2 |
2019 |
SDG 9
|