| IEC |
TC 47 |
Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat |
IEC 60749-20:2020 |
60749-20:2020 |
3 |
2020 |
SDG 9
|
| ISO |
ISO/TC 106/SC 4 |
Dentistry — Sterile injection needles for single use |
ISO 7885:2010 |
7885 |
3 |
2010 |
SDG 3
|
| ISO |
ISO/TC 45/SC 2 |
Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
ISO 2285:2019 |
2285 |
8 |
2019 |
SDG 9
|
| IEC |
TC 86/SC 86B |
Fibre optic interconnecting devices and passive components - Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments |
IEC 61753-088-2:2013 |
61753-088-2:2013 |
1 |
2013 |
SDG 9
|
| IEC |
TC 91 |
Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film |
IEC 61249-3-3:1999 |
61249-3-3:1999 |
1 |
1999 |
SDG 3, 7, 9, 12
|
| ISO |
ISO/TC 249 |
Traditional Chinese medicine — General requirements of moxibustion devices |
ISO 18666:2021 |
18666 |
2 |
2021 |
SDG 3
|
| ISO |
ISO/TC 20/SC 10 |
Aerospace — Clamps for fluid systems — Test methods |
ISO 9679:2006 |
9679 |
1 |
2006 |
SDG 9
|
| ISO |
ISO/TC 121/SC 8 |
Medical suction equipment — Part 1: Electrically powered suction equipment |
ISO/FDIS 10079-1 |
10079 |
4 |
2021 |
SDG 3
|
| ISO |
ISO/IEC JTC 1/SC 6 |
Information technology — Generic applications of ASN.1: Fast infoset security — Part 3: |
ISO/IEC 24824-3:2008 |
24824 |
1 |
2008 |
SDG 9
|
| ISO |
ISO/TC 31/SC 4 |
Truck and bus tyres and rims (metric series) — Part 1: Tyres |
ISO 4209-1:2001 |
4209 |
6 |
2001 |
SDG 9
|
| UNECE |
Working Party on Regulatory Cooperation and Standardization Policies (WP.6) |
START-Ed Module on Benefits of Standardization to Society |
Module Standardardization |
|
|
|
SDG 5, 12, 17
|
| IEC |
TC 113 |
Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterisation, 2-electrode cell method |
IEC TS 62607-4-1:2015 |
62607-4-1:2015 |
2 |
2015 |
SDG 9
|
| ISO |
ISO/TC 22/SC 31 |
Road vehicles — Vehicle interface for electronic Periodic Technical Inspection (ePTI) — Part 2: Application and communication requirements conformance test plan |
ISO/DIS 20730-2 |
20730 |
2 |
2022 |
SDG 9
|
| IEC |
TC 8 |
Use case methodology - Part 2: Definition of the templates for use cases, actor list and requirements list |
IEC 62559-2:2015 |
62559-2:2015 |
1 |
2015 |
SDG 7, 9, 11, 12
|
| ISO |
ISO/TC 204 |
Electronic fee collection — Security framework |
ISO 19299:2020 |
19299 |
1 |
2020 |
SDG 9
|
| ISO |
ISO/TC 133 |
Clothing — Digital fittings — Part 2: Vocabulary and terminology used for attributes of the virtual human body |
ISO 18825-2:2016 |
18825 |
1 |
2016 |
SDG 9
|
| ISO |
ISO/TC 24/SC 4 |
Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces — Amendment 1 |
ISO 21501-4:2018/DAmd 1 |
21501 |
2 |
2022 |
SDG 9
|
| ISO |
ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization |
ISO 11357-3:2018 |
11357 |
3 |
2018 |
SDG 9
|
| IEC |
TC 20 |
Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General |
IEC 60287-1-1:2006 |
60287-1-1:2006 |
2 |
2006 |
SDG 7, 9
|
| ISO |
ISO/TC 58/SC 2 |
Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
ISO 10156:2017 |
10156 |
4 |
2017 |
SDG 9
|
| ISO |
ISO/TC 142 |
Biological equipment for treating air and other gases-Application guidance for deodorization inwastewater treatment plants |
ISO/CD 23139 |
23139 |
1 |
2023 |
SDG 3
|
| ASTM |
C13.05 |
Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design |
C1417 |
C1417 |
|
2019 |
SDG 6, 11
|
| ISO |
ISO/TC 118/SC 3 |
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 3: Polishers and rotary, orbital and random orbital sanders |
ISO 28927-3:2009 |
28927 |
1 |
2009 |
SDG 9
|
| ISO |
ISO/TC 281 |
Fine bubble technology — Measurement technique matrix for the characterization of fine bubbles |
ISO/TR 23015:2020 |
23015 |
1 |
2020 |
SDG 2
|
| ISO |
ISO/IEC JTC 1/SC 31 |
Information technology — Automatic identification and data capture techniques — Part 21: Crypto suite SIMON security services for air interface communications |
ISO/IEC 29167-21:2018 |
29167 |
1 |
2018 |
SDG 9
|
